概述

summarize

WZPK温度变送器是我公司推出的一款高性价产品，适用于多达十种的各型热电偶和热电阻信号变送。该产品使用24位Σ-△模拟前端，保证测量的高精度；完善的防浪涌、防反接设计，避免了工程应用中的误安装和误操作；增强的软件安全设计，包括低压监控复位、多任务调度优化等功能。WZPK全部采用进口元器件，保证较长的使用寿命和稳定性。为了便于大客户的长期备货，可使用USB通讯线进行组态设置，并且设置时无需外接电源。

WZPK temperature transmitter is a high cost product from our company, suitable for up to ten types of thermocouple and thermal resistance signal transmission. The product uses a 24-bit Σ-△ analog front end to ensure high precision measurement. Perfect anti-surge and anti-reverse design to avoid misinstallation and misoperation in engineering applications; Enhanced software security design, including low-voltage monitoring reset, multi-task scheduling optimization and other functions. WZPK all use imported components to ensure long service life and stability. In order to facilitate the long-term stocking of large customers, the USB communication cable can be usedfor configuration Settings, and no external power supply is required for setting.

二、技术参数

Technical parameters

三、接线方式

wiring mode

1号接线柱和2号接线柱分别为24V电源正负极，线路板带防反接功能。

The No. 1 terminal and No. 2 terminal are respectively the positive and negative terminals of 24V power supply, and the circuit board has anti-reverse connection function.

热电阻连接支持二线制、三线。连接方式如上图所示，实线为传感器引出线，虚线为短接线，需要用户自行用短导线连接（出厂时也可按客户需要在内部短接好）。

热电偶正极连接3号接线柱，负极连接4号接线柱即可。

The thermal resistance connection supports two wire and three wire. The connection method is shown in the figure above. The solid line is the sensor leadout line, and the dashed line is the short wire, which needs to be connected by the user with a short wire (it can also be short-connected internally according to the customer's needs).

The positive terminal of the thermocouple is connected to terminal 3, and the negative terminal is connected to terminal 4.

三、上位机软件使用方法

the use of computer software

安装USB通讯线驱动和程序运行环境；

通讯线一端接电脑USB接口，另一端接在智能模块上，无需24V供电；

双击WZPK.exe文件进入设置软件；

点击串口号下拉表选择连接线对应的串口号，点击确定；

点击左上角的组态设置就可以进行组态设置。

Install USB communication cable driver and program running environment;

One end of the communication cable is connected to the USB interface of the computer, and the other end is connected to the intelligent module, without 24V power supply;

Double-click the WZPK.exe file to enter the setup software;

Click the serial port number drop-down list to select the serial port number corresponding to the cable, and click OK;

Click Configuration Settings in the upper left corner to set the configuration.

四、使用须知

Instructions for Use

仪表储藏与使用适宜在环境温度为-30℃~80℃，湿度小于80%的场合；

上位机使用的USB通讯线为我公司专门定制，使用其他数据线连接可能会损伤模块；

仪表连接电源时应参照第三节接线方式进行操作，在确认操作无误后方可接通电源进行运行。

Instrument storage and use is suitable for the environment temperature of -30℃~80℃, humidity is less than 80% of the occasion;

The USB communication cable used by the upper computer is specially customized for our company, and the use of other data cables may damage the module;

When connecting the instrument to the power supply, please refer to the wiring method in Section 3 for operation, and then switch on the power supply for operation after confirming that the operation is correct.

五、质保

Quality assurance

用户在遵守使用规范的情况下，自出厂日期起，我们为用户提供保修一年以及终身的技术支持服务。欢迎广大客户来电咨询，我们重视您的任何宝贵建议。

Users in the case of compliance with the use of specifications, since the factory date, we provide users with a one-year warranty and lifelong technical support services. Welcome customers to inquire, we value any valuable suggestions you.

无锡市惠华特种仪表有限公司 

移动电话：15716188608

公司电话：0510-85180508

传真电话：0510-88152298

05288518052885180528

地址：无锡市滨湖区蠡湖商务园23号